Chambers Safety Systems

The Old Appliance Club

Parts, Service, Information for Antique Stoves and Appliances theoldapplianceclub.net / 805-643-3532

Sponsored by J.E.S. Enterprises, Inc. and ... People Like You, who Love Old Appliances

Safety Systems Built to Fit

Other Stove Manufacturers Safety Systems

Is Your Stove

Up To Code and Safe ?

Has your Chambers range been “red-tagged” and put out of commission because it lacks an oven

safety system?

Did you purchase a vintage stove for use in your kitchen only to get it “knocked-down” because it

failed to meet code?

If so, please read further for an explanation of why you should be concerned and... a solution.

Most early to older stoves were manufactured without oven safety systems simply because they were not in existence. The way you would ignite the oven is with a match.

Unfortunately, through misuse this caused a

great deal of accidents -- even deaths.

E-mail us at toac@sbcglobal.net for the exact instructions on the pictures required to build a Safety System for your Chambers stove.

You will receive detailed information

along with an estimate of cost.

Free phone consultation.

2 Years Warranty from Purchase Date

Your Chambers Oven Safety System is Built to Last.

Fully Tested and Guaranteed!

Built for you by a professional patternmaker with four decades of Chambers experience.

Installation is easily done by a local appliance technician.

How could this happen? It doesn’t take much. You turn on the oven, then suddenly something as simple as a phone or door bell ringing pulls your attention away from manually lighting the oven. With the gas valve fully turned on, ‘raw’ gas rapidly fills the closed oven cavity. In short order you can imagine what can happen if just one spark – even from a light switch – can do when gas meets an ignition point.

Today, with the vast increase of enthusiasts purchasing and installing vintage stoves in their homes, everyone should be aware that gas ranges must be up to code and safe!

By adding a safety system into your stove, you will have the following benefits:

Standing Pilot – With the addition of a standing pilot for oven ignition, the need to use a match to manually light the oven is eliminated. If the pilot blows out due to a gust of wind or for any reason at all, the main flow of gas traveling into the oven will be cut off immediately.

Safety Valve – The safety valve works as a guardian to permit or restrict raw gas from reaching its final destination point or ignition. If the pilot is “blown out” or diminishes due to a lack of gas pressure, a signal, carried by a sensor that leads to the safety valve, hits a “red alert” that automatically shuts down the flow of fuel to the oven.

Few original Chambers ranges have an oven safety system.

Due to thousands of letters that we received in regard to this problem, we felt it was time to

professionally construct a strong as steel safety system for the Chambers range.

This device can save your home, your life and your family!

Everything you need for installation is included in one package.

All Parts are brand NEW and AGA approved!

TUBING IN ALL SIZES AVAILABLE

(We carry tubing including the rare size 5/32" used by Chambers.

All work is done in a Fully Licensed Facility. Guaranteed 2 full years from delivery date!

We build it for you! Installation is easily done by a local stove service technician.

If you should need further assistance FREE HELP over the phone

is included by a trained Chambers specialist with every order!

LARGEST INVENTORY OF ANTIQUE CHAMBERS STOVES IN AMERICA

We have over 350 vintage Chambers ranges

and thousands of Chambers parts in our inventory plus

a full machine shop for custom fabrication work.

We can manufacture safety devices for

"A", "B" or "C" or most any Chambers stove manufactured since the 20s.

OVER 3,500 CHAMBERS STOVES NOW PROTECTED WITH SAFETY SYSTEMS

3,500 systems have been manufactured and installed to date with zero failures.

Your Chambers Safety System comes fully tested, guaranteed, and is fabricated by a professional patternmaker with decades of Chambers experience.

All New Parts - AGA approved!

E-mail us today at toac@sbcglobal.net for instructions on the exact

pictures we need to build your safety system.

You will receive detailed information

along with a free estimate of cost.

DON'T TAKE A CHANCE....

Get your Chambers Safety System and be up to code, up to date and safe today!

For All Other Stove Manufacturers Requiring SAFETY SYSTEMS

We carry safety equipment parts that can be adapted to most ranges, or

can build a system for various stove types.

If your range has been knocked down for code violation or

you would like to eliminate match lighting your oven,

send pictures of your stove, the make and model, and information detailing your request to toac@sbcglobal.net or call (805) 643-3532.

Call (805) 643-3532 or Email TOAC@sbcglobal.net for Assistance.

TOAC Shop ... Parts, Services & Information for Antique Stoves.

Outside USA or CANADA - must have USA address for all orders.

Get Help Instantly... we accept Debit Cards, MC, Visa, Amex, Discover and Diners Club too.

ECheck, and PayPal.

PayPal account not necessary ... PayPal accepts all major Credit Cards.

PayPal Orders: use email toac@sbcglobal.net and describe your Order.

TERMS: Sales Tax will be applied to all California orders.

Insurance Coverage or Signature Confirmation Delivery available on request.

Not liable or responsible for any damage or delays due to shipper.

No replacement or refund on any item that has been lost or recorded as Delivered by carrier.

We recommend you hire a qualified, licensed service technician diagnose your stoves problem first as we do not diagnose mechanical problems over the telephone.

All warranties on thermostats or safety valves start from the day the customer receives the order regardless of when the unit is installed.

All sales final - no refund nor replacement on: any thermostat rebuilding orders or thermostat exchanges, custom fabricated safety systems, safety valves, pilot assemblies, minipilots, combination pilot replacements or specific rebuild orders.

All sales final - no refund nor replacement on rebuilt or new electrical parts or elements due to damage from a malfunctioning appliance that caused the replacement part to arc and burn out.

All stated warranties on thermostats, safety valves or any other equipment start from the day the customer receives the order regardless of when the unit is installed. If the unit is sent in for warranty service the customer is responsible for shipping charges. Warranty service is in effect for the stated period only.

All sales final on: PDF files, printed materials and electrical parts, used parts and services. Unless stated used parts are not rebuilt.

25% Restocking fee will be charged on new parts that have been returned. Shipping is nonrefundable. **All Credits Must Be Used Within 6 months from issue date or they will be void.

No Return if new parts have been damaged or worn. If you order a part without sending in the required e-mail pictures first, there is no refund or exchange.

25% Processing fees will be charged on all cancelled orders.

Refunds for new or used parts must be received within 30 days or no credit will be issued. 25% restocking fee will be charged. Items are subject to inspection before eligible for full or partial refund credit. No credit on any damaged non-useable items. Shipping is non-refundable.

We reserve the right to refuse or cancel service or orders to anyone for

any reason not prohibited by law without explanation.

Chargebacks: Customers must attempt to return merchandise before

proceeding with a chargeback.

Not responsible for parts or orders left after 30 days unless previously arranged.

Prices subject to change without notice.

Parts, Service, Information ... Antique Stove Preservation.

Love Your Old Appliances? See The Old Appliance Club